ECE R10 Countries

Countries for UN ECE Regulation 10

UN ECE publishes the list of countries (contracting parties) for Regulation 10 (Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility). They are updating the list depending on the version of ECE R10. They updated the list on 24 February 2021 according to revision 06.

Each country is represented with a unique ECE R10 symbol and has a designated type approval authority. For instance, Ireland’s ECE R10 symbol is E24 and its designated type approval authority is NSAI.

ECE R10 symbols, together with unique type-specific numbers, are used on type approval certificates of the products. Type approval certificates are issued by designated type approval authorities which are mostly governmental organizations.

ECE R10 Symbols	Contracting Parties	Designated Type Approval Authority(ies)
E1	Germany	Kraftfahrt-Bundesamt (KBA)PRO EMV Labor
E2	France	Ministère de la Transition Ecologique et Solidaire CNRV
E3	Italy	Ministero delle Infrastrutture e dei Trasporti Dipartimento
E4	Netherlands	RDW
E5	Sweden	Transportstyrelsen (Swedish Transport Agency)
E6	Belgium	Service Public fédéral (SPF) Mobilité et Transports
E7	Hungary	Innovációs és Technológiai Minisztérium
E8	Czech Republic	Ministry of Transport
E9	Spain	Ministerio de Industria
E10	Serbia	Road Traffic Safety Agency
E11	United Kingdom	Vehicle Certification Agency (VCA)
E12	Austria	Bundesministerium für Verkehr
E13	Luxembourg	Ministère de la Mobilité et des Travaux publicsSociété Nationale de Certification et d’Homologation (SNCH)
E14	Switzerland	OFROU
E16	Norway	Vegdirektoratet
E17	Finland	Finnish Transport and Communications Agency
E18	Denmark	Danish Road Traffic Authority
E19	Romania	Ministerul Transporturilor si Infrastructurii
E20	Poland	Transportowy Dozor Techniczny (TDT)
E21	Portugal	Instituto da Mobilidade e dos Transportes (IMT)
E22	Russian Federation	Federal Agency on Technical Regulating and Metrology (NAMI)
E23	Greece	Ministry of Transport and Communications
E24	Ireland	National Standards Authority of Ireland (NSAI)
E25	Crotia	State Office for Metrology Independent Service for Type Approval of Motor Vehicles
E26	Slovenia	Slovenia Traffic Safety Agency – Vehicle Department
E27	Slovakia	Ministry of Transport and Construction
E28	Belarus	State Committee for Standardization (Gosstandart)
E29	Estonia	Estonian Road Administration
E30	Republic of Moldova	not announced yet
E31	Bosnia and Herzegovina	not announced yet
E32	Latvia	Road Traffic Safety Directorate
E34	Bulgaria	Ministry of Transport, Executive Agency Road Transport Administration
E35	Kazakhstan	Committee of Technical Regulation and Metrology of the Ministry of Investment and Development (CTRM)
E36	Lithuania	Lithuanian Transport Safety Administration
E37	Turkey	Ministry of Industry and Technology
E39	Azerbaijan	not announced yet
E40	North Macedonia	Ministry of Economy
E42	European Union	not assigned
E43	Japan	Ministry of Land, Infrastructure, Transport and Tourism
E45	Australia	not announced yet
E46	Ukraine	Ministry of Infrastructure
E47	South Africa	National Regulator for Compulsory Specifications (NRCS)
E48	New Zealand	not announced yet
E49	Cyprus	Road Transport Department
E50	Malta	Malta Standards Authority
E51	Republic of Korea	not announced yet
E52	Malaysia	Road Transport Department (JPJ)
E53	Thailand	not announced yet
E54	Albania	not announced yet
E55	Armenia	National Body for Standards and Metrology (CJSC)
E56	Montenegro	not announced yet
E57	San Marino	Autorità per l’Omologazione
E58	Tunisia	Agence Techique des Transports Terrestres
E60	Georgia	not announced yet
E62	Egypt	Ministry of Trade and Industry
E63	Nigeria	not announced yet
E64	Pakistan	not announced yet

Above list shows the countries which are contracting parties for UN ECE Regulation 10. List is derived from official publication  which is named as ECE/TRANS/WP.29/343/Rev.29/Add.1 and published on 24 February 2021 by ECE.

Frequently Asked Questions about ECE R10 countries and country codes

1. Are ECE R10 symbols identical in each country?

Yes, within UN ECE member states, Regulation 10 certifications are identical. For instance if designated type approval authority of Ireland has issued your product’s type approval, you will have ECE R10 symbol of E24 and this is valid within all UN ECE member states. Thus, single E marking cover all countries listed on the list.

2. What Designated Type Approval Authorities do?

They issue type approval certificates. They mostly issue certificates with their Designated Technical Service(s).

3. What Designated Technical Services do?

They receive type approval application documents, check and review them. When the documents submitted by the applicant (manufacturer, exporter or importer)  are ready for certification they sent them to Designated Type Approval Authority.

4. What GZSAdoes?

We collaborate with Designated Technical Services and help manufacturers, exporters or importers to certify their products according to recent version of UN ECE R10. We are both offering EMC testing and type approval services according to UN ECE Regulation Revision 6.

5. Which country codes GZSA offers?

Currently, we are offering E1(Germany) and E24(Ireland) marking services.

E Mark认证，可以联系曾工，139 2899 3907