EMC PARTNER GENECS (3.31) - MIG和TRA GENERATOR系列的远程控制软件

显示全部楼层 · 2021-1-21 10:56:32

马上注册，结交更多电磁兼容工程师，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册会员

×

EMC PARTNER MIG和TRA GENERATOR系列的远程控制软件GENECS (3.31)

GENECS是一款相对简单的远程控制软件，具有增强功能，例如测试报告定制测试、设置。

GENECS (Generator Controlling Software) is an emulation of the MIG and TRA generator front panels. GENECS is a relatively simple remote control software with enhanced features such as test report customization. Tests, setups, protocols and a Log File can additionally be stored and maintained on the remote computer. Connection between generator and computer requires one common serial port. Data is
transmitted with a software error-correcting protocol. The cable-length should not exceed 10m (30ft). For connections over 10m an optical link is recommended (option). The optical link is generally recommended for communication in a harsh EMC environment. A generator’s control and display functions are transmitted over the serial link to the computer and displayed on a virtual front panel. Commands from the computer act directly on the instrument. This way the handling of GENECS is equivalent to a user sitting in front of the real generator.

GENECS includes additional features, not in the generators, for viewing and editing protocols (for example insert comments). During the tests a Log File with all test parameters, date/time and test results is created. The Demo-Mode of GENECS simulates all functions of the selected type of Generator. The use and handling of all menus, dialogs and parameters is the same as on the Generator itself. The benefit is that users can create test routines on the office computer and download them into the generator later. GENECS can be used to control up to 4 separate generators. An activation code is requried for each generator attached to GENECS. To fully install TEMA software, the GENECS package must also be downloaded.

GENECS（发生器控制软件）是MIG和TRA发生器前面板的仿真。GENECS是一款相对简单的远程控制软件，具有增强功能，例如测试报告定制测试、设置。协议和日志文件可以另外存储和维护在远程计算机上。发生器与计算机之间的连接需要一个公共的串行端口。电缆长度不应超过10m（30ft）。对于10m以上的连接，建议使用光链路（选件）。通常建议在恶劣的EMC环境中进行通信。发电机的控制和显示功能通过串行链接传输到计算机，并显示在虚拟前面板上。来自计算机的命令直接作用于仪器。这样，GENECS的处理等效于坐在真实生成器前面的用户。

GENECS包括其他功能（不在生成器中），用于查看和编辑协议（例如，插入注释）。在测试期间，将创建一个包含所有测试参数，日期/时间和测试结果的日志文件。GENECS的演示模式模拟所选类型的Generator的所有功能。所有菜单，对话框和参数的使用和处理与生成器本身相同。好处是用户可以在办公室计算机上创建测试例程，然后将其下载到生成器中。GENECS可用于控制多达4个独立的发生器。对于连接到GENECS的每个发生器，都需要一个激活码。要完全安装TEMA软件，还必须下载GENECS软件包。