ANSI C63.4-2014 - used by July 13, 2016.

Publication Number: 300643
unintentional radiators (ANSI C63.4-2014) and intentional radiators (ANSI C63.10-2013) these standards be used by July 13, 2016.During the transition period the new editions as well as the older editions of ANSI C63.4 and ANSI C63.10 (as noted in FCC Public Notice DA 09-2478) may be used.
https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?id=21079&switch=P

ANSI C63.4-2014
Methods Of Measurement Of Radio-Noise Emissions From Low-Voltage Electrical And Electronic Equipment In The Range Of 9 Khz To 40 Ghz

ANSI C63.4-2014

Table of Contents
1 Overview
2 Normative references
3 Definitions, acronyms, and abbreviations
4 Measurement instrumentation
5 Test facilities
6 General requirements for EUT arrangements,  
configuration, and operation
7 AC power-line conducted emission measurements
8 Radiated emission measurements
9 Radio-noise power
10 Test reports
11 Measurement of ITE
12 Measurement of unintentional radiators other  
than ITE
13 Limit relaxation for transients
Annex A (informative) - Applicable clauses and  
subclauses of ANSI C63.4 by equipment type
Annex B (normative) - Specifications and verification  
of LISN characteristics
Annex C (normative) - Absorbing clamp
Annex D (normative) - Validation of radiated emissions
standard test sites
Annex E (informative) - Method of exploratory radiated  
emission maximization
Annex F (normative) - Test procedure for emissions  
testing in TEM waveguides (30 MHz to 1 GHz)
Annex G (informative) - Sample OATS to TEM waveguide  
validation spreadsheet
Annex H (informative) - Precautions in using spectrum  
analyzers
Annex I (informative) - Application of ANSI C63.4 to  
United States and Canadian requirements
Annex J (informative) - Guidance on the construction  
of nonconductive EUT support tables
Annex K (informative) - (Reserved for future use)
Annex L (informative) - (Reserved for future use)
Annex M (informative) - (Reserved for future use)
Annex N (normative) - Test site-specific hybrid antenna  
qualification procedures, limitations and  
acceptance criteria
Annex O (informative) - Bibliography
Annex P (informative) - Keyword index

Abstract
Describes consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 9 kHz to 40 GHz, as usable, for example, for compliance testing to U.S. (47CFR15) and Canada (ICES-003) regulatory requirements.

History
2014 [20/06/2014]
2009 [15/09/2009]
2003 [30/01/2004]
2001 [06/06/2001]
2000 [08/12/2000]
92 [21/03/1991]
91 [01/01/0001]
88 [01/01/0001]
81 [01/01/0001]

http://www.c63.org/news.htm

http://www.c63.org/documents/misc/posting/new_interpretations.htm

https://www.fcc.gov/oet/ea/eameasurements.html

http://publicaa.ansi.org/sites/apdl/Documents/Standards%20Action/Approved%20American%20National%20Standards.pdf