设为首页收藏本站
开启辅助访问 切换到窄版
帖子
EMC技术社区»社区 › 标准与测试认证 › 汽车电子 - 标准法规与认证 › 泰国TISI认证介绍,TISI认证标志,TISI认证

泰国TISI认证介绍,TISI认证标志,TISI认证

[复制链接]
查看14298 | 回复1 | 2014-11-12 21:00:07 | 显示全部楼层 |阅读模式

马上注册，结交更多电磁兼容工程师，享用更多功能，让你轻松玩转社区。

您需要 登录 才可以下载或查看，没有账号？注册会员

×
1969年，泰国工业标准研究院（TISI）由泰国政府内阁批准成立，其职能作为国家标准立法机构颁布修定相关法律法规。旨意保护消费者权益，环境保护和自然资源保护，使工业发展成为有竞争力的世界市场，并为确保公平贸易，致力于消除标准化措施造成的贸易障碍。

2009年3月9日，泰国工业标准学会(TISI)为加强质量控制、消费者保护和平等对待本地与进口同类产品提出修订产品认证标准TISI-R-PC-01。该修订标准的公布适用于自愿及强制认证计划，并遵守ISO/IEC 指南。

泰国TISI认证介绍, 泰国TISI认证标志
                                 2-110Z319562H45.jpg

VOLUNTARY CERTIFICATION MARK                 MANDATORY CERTIFICATION MARK         
自愿性TISI认证标志                                                   强制性TISI认证标志

泰国工业标准协会（TISI）是工业部下属的一个国家标准组织。TISI有权根据已制定的泰国标准对产品进行认证，泰国政府要求对10个行业的60种产品进行强制性认证，包括：农业、建筑材料、消费品、电器及附件、PVC管材、医疗设备、LPG气体容器、表面涂料及车辆。

泰国政府要求对十个领域的60种产品进行强制性认证，这些产品包括：农产品、建筑原料、消费品、电气设备及附件、PVC管、医疗设备、LPG汽体容器、表层涂料及交通工具等。

泰国TIS认证范围10类
1、Civil and construction material
2、Consumer's products
3、Electrical/ electronic engineering
4、Fluid, engineering
5、Food
6、Heat transfer, engineering
7、Medical, science
8、Paints, colour, and varnishes
9、Mechanical Engineering and Vehicles
10、Chemical

泰国标准工业协会介绍(TISI)

TISI是一个国际间认可的标准化中心,来适应符合政府，商业和社会需要并加强可持续竞争能力。

政策：
TISI政策进行标准化和致力于推广和发展工业，使企业家，消费者和整个国家的利益最大化。

目标：
1.保护消费者
2.环境保护和国家资源保护
3.工业发展使在世界市场上有竞争力
4.确保公平贸易和消除由标准测量引起的贸易壁垒

背景：
1966年　泰国工业标准化项目获得批准,由内阁将其纳入第二个国民经济和社会发展计划。在这方面，工业产品标准法案草案被提交到内阁来考虑。
1968年工业产品标准法案B.E.2511(1968)由内阁认可并被颁布，从1969年1月开始生效。
1969年在1969年1月，泰国工业标准协会(TISI)在工业部中成立，作为泰国国家标准机构。
1979年在1979年3月。在工业部下TISI被升级为部门地位。TISI范围也包括国家食品法典委员会办事。

责任：
TISI责任是根据下面的：
1.工业产品标准法案B.E2511(1968)
2.内阁决议
3.工业部政策和总体规划
4.政府政策
5.国家经济和社会发展计划

使命：
1.发展国家标准和监督产品和和服务质量来符合要求和国际惯例
2.发展共同产品标准和提供认证服务
3.促进和发展国家标准化活动
4.开展和国外标准化组织双边和多边合作
5.提供标准化信息
6.建立国家单一标准化网络

泰国强制标准清单：

cstd_head_e.gif L i s t  o f  C o m p u l s o r y  S t a n d a r d s
Civil and construction material
1TIS 15 Part 1-2555 (2012) Portland cement Part 1 Specification
Effective Date : May 3, 2014
2TIS 20-2543 (2000) Steel bars for reinforced concrete : round bars
Effective Date : October 8, 2004
3TIS 24-2548 (2005) Steel bars for reinforced concrete: deformed bars
Effective Date : May 21, 2006
4TIS 95-2540 (1997) Steel wires for prestressed concrete
Effective Date : March 30, 2003
5TIS 348-2540 (1997) Low carbon steel wire rods
Effective Date : December 6, 1998
6TIS 420-2540 (1997) Steel wires strands for prestressed concrete
Effective Date : March 30, 2003
7TIS 528-2548 (2005) Hot rolled flat carbon steel of commercial and drawing qualities
Effective Date : April 14, 2008
8TIS 792-2554 (2011) Ceramic sanitary wares : water closet
Effective Date : August 21, 2013
9TIS 880-2547 (2004) Clear float glass
Effective Date : June 8, 2005
10TIS 1227-2539 (1996) Hot rolled structural steel sections
Effective Date : May 10, 1998
11TIS 1228-2549 (2006) Cold formed structural steel sections
Effective Date : April 14, 2008
12TIS 1344-2541 (1998) Tinted float glass
Effective Date : November 4, 2001
13TIS 1390-2539 (1996) Hot rolled steel sheet piles
Effective Date : August 21, 1998
14TIS 1479-2541 (1998) Hot-rolled carbon steel coil, strip, plate and sheet for general structure
Effective Date : August 25, 2001
15TIS 1499-2541 (1998) Hot-rolled carbon steel coil, strip, plate and sheet for welded structure
Effective Date : August 25, 2001
16TIS 1501-2552 (2009) Hot rolled flat carbon steel for machine structure
Effective Date : April 11, 2011
17TIS 1735-2542 (1999) Hot-rolled carbon steel coil and strip for pipes and tubes
Effective Date : August 25, 2001
18TIS 1884-2542 (1999) Hot - rolled high strength steel coil strip plate and sheet with improved formability for automobile structural uses
Effective Date : November 4, 2001
19TIS 1999-2543 (2000) Hot - rolled steel coil plate and sheet for automobile structural use
Effective Date : September 5, 2002
20TIS 2011-2543 (2000) Superior atmospheric corrosion resisting hot - rolled steel coil strip plate and sheet
Effective Date : September 5, 2002
21TIS 2012-2543 (2000) Cold reduced carbon steel coil, strip and sheet of commercial and drawing qualities
Effective Date : May 13, 2002
22TIS 2060-2543 (2000) Hot - rolled carbon steel coil strip plate and sheet for gas cylinders
Effective Date : October 14, 2002
23TIS 2140-2546 (2003) Cold rolled steel coil strip and sheet for automobiles uses
Effective Date : January 10, 2005
24TIS 2508-2555 (2012) Ceramic tiles
Effective Date : January 15, 2014
Consumer's products
1TIS 53-2548 (2005) Matches
Effective Date : November 14, 2006
2TIS 78-2549 (2006) Laundry detergent powder
Effective Date : July 14, 2008
3TIS 332-2537 (1994) Dry chemical portable fire extinguishers
Effective Date : March 27, 1995
4TIS 685 Part 1-2540 (1997) Toys Part 1 General requirements
Effective Date : January 5, 1999
5TIS 685 Part 2-2540 (1997) Toys Part 2 Packages and labelling
Effective Date : January 5, 1999
6TIS 685 Part 3-2540 (1997) Toys Part 3 Methods of test and analysis
Effective Date : January 5, 1999
7TIS 879-2553 (2010) Gas lighters
Effective Date : March 13, 2013
8TIS 882-2532 (1989) Portable fire extinguishers: Foam
Effective Date : June 17, 1991
9TIS 969-2533 (1990) Rubber nipples for babies' bottles
Effective Date : June 17, 1997
10TIS 1025-2539 (1996) Babies' dummies
Effective Date : September 19, 1997
11TIS 1136-2536 (1993) Cling film
Effective Date : November 10, 1999
12TIS 2440-2552 (2009) Stainless steel : seamed stockpots
Effective Date : August 18, 2011
Electrical/ electronic engineering
1TIS 4 Part 1-2529 (1986) Incandescent lamps
Effective Date : May 1, 1987
2TIS 10-2529 (1986) Low-voltage distribution link fuses
Effective Date : November 21, 1987
3TIS 11 Part 3-2553 (2010) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 3: non-sheathed cables for fixed wiring
Effective Date : July 30, 2013
4TIS 11 Part 4-2553 (2010) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 4: sheathed cables for fixed wiring
Effective Date : July 30, 2013
5TIS 11 Part 5-2553 (2010) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 5: flexible cables (CORDS)
Effective Date : July 30, 2013
6TIS 11 Part 101-2553 (2010) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 101: sheathed cables for general purposes
Effective Date : July 30, 2013
7TIS 23-2521 (1978) Ballast for fluorescent lamps
Effective Date : April 1, 1979
8TIS 85-2548 (2005) Round wire concentric lay overhead electrical stranded conductors
Effective Date : January 23, 2008
9TIS 183-2547 (2004) Glow starters for fluorescent lamps
Effective Date : September 18, 2006
10TIS 293-2541 (1998) PVC-insulated aluminium cables
Effective Date : December 27, 1999
11TIS 344-2549 (2006) Lampholders for tubular fluorescent lamps and starterholders
Effective Date : July 13, 2008
12TIS 366-2547 (2004) Electric irons : safety requirement
Effective Date : December 26, 2005
13TIS 408-2553 (2010) Copper and copper alloys for general electrical purposes : rod and bar
Effective Date : April 17, 2013
14TIS 812-2548 (2005) Motor-compressors : safety requirements
Effective Date : January 23, 2008
15TIS 824-2551 (2008) Switches for household and similar fixed electical installations : general requirements
Effective Date : November 18, 2008
16TIS 870-2532 (1989) Electric stoves; open type heating elements: safety requirements
Effective Date : September 21, 1993
17TIS 934-2533 (1990) A.C. electric fans: safety requirements
Effective Date : December 25, 1991
18TIS 956-2533 (1990) Fluorescent lamps: safety requirements
Effective Date : September 25, 1991
19TIS 909-2548 (2005) Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)
Effective Date : November 19, 2007
20TIS 1039-2547 (2004) Electric rice-cookers : safety requirements
Effective Date : February 21, 2006
21TIS 1195-2536 (1993) Mains operated electronic and related apparatus for household and similar general use: safety requirements
Effective Date : August 31, 2002
22TIS 1291-2545 (2002) Uninterruptible power systems
Effective Date : April 26, 2004
23TIS 1291 Part 1-2553 (2010) Uninterruptible power systems Part 1 : general and safety requirements
Effective Date : December 14, 2014
24TIS 1291 Part 2-2553 (2010) Uninterruptible power systems Part 2 : Electromagnetic compatibility requirements
Effective Date : December 14, 2014
25TIS 1291 Part 3-2555 (2012) Uninterruptible power systems Part 3 : method of specifying performance and test requirements
Effective Date : December 14, 2014
26TIS 1389-2539 (1996) Tumbler dryers : safety requirements
Effective Date : March 23, 2002
27TIS 1462-2548 (2005) Clothes washing machines household use
Effective Date : August 21, 2007
28TIS 1509-2547 (2004) Electric fryers : safety requirement
Effective Date : April 27, 2006
29TIS 1693-2547 (2004) Instantaneous water heaters : safety requirements
Effective Date : April 23, 2006
30TIS 1773-2548 (2005) Microwave ovens safety requirements
Effective Date : August, 21 2007
31TIS 1955-2551 (2008) Lighting and similar equipment : radio disturbance limits
Effective Date : June 19, 2011
32TIS 1985-2549 (2006) Appliances for skin or hair care : safety requirement
Effective Date : July 14, 2008
33TIS 2062-2543 (2000) Electric thermopots : safety requirements
Effective Date : April 26, 2004
34TIS 2134-2553 (2010) Room air conditioners : energy efficiency
Effective Date : April 28, 2013
35TIS 2165-2548 (2005) Optical fiber cables - Part 3-10: outdoor cables - family specification for dust and directly buried optical telecommunication cables
Effective Date : January 26, 2007
36TIS 2166-2548 (2005) Optical fiber cables - Part 3-20: outdoor cables - family specification for optical self-supporting aerial telecommunication cables
Effective Date : June 22, 2007
37TIS 2186-2547 (2004) Household refrigerators : environmental requirements : energy efficiency
Effective Date : December 23, 2006
38TIS 2202-2547 (2004) Power cables with xlpe insulated for rated voltage from 60 kv up to 115 kv
Effective Date : October 15, 2006
39TIS 2214-2548 (2005) Household refrigerators : safety requirements
Effective Date : December 23, 2006
40TIS 2217-2548 (2005) Secondary cells and batteries containing alkaline or other non-acid electrolytes - safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
Effective Date : January 26, 2007
41TIS 2425-2552 (2009) Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCBOs) - Part 1 : general rules
Effective Date : April 8, 2011
42TIS 2434-2552 (2009) Polyolefin insulated copper conductor telecommunnication cables for aerial installation
Effective Date : December 17, 2010
Fluid, engineering
1TIS 17-2532 (1989) Unplasticized polyvinyl chloride pipes for drinking water services
Effective Date : September 14, 1990
2TIS 2066-2552 (2009) Shower units : environment requirements : water-savings
Effective Date : January 19, 2011
3TIS 2067-2552 (2009) Faucets for sanitary wares : environment requirements : water-savings
Effective Date : January 19, 2011
Food
1TIS 51-2530 (1987) Canned pineapple
Effective Date : May 15, 1988
Heat transfer, engineering
1TIS 27-2543 (2000) Liquefied petroleum gas containers
Effective Date : March 27, 2002
2TIS 950-2547 (2004) Solid alcohol fuel
Effective Date : February 3, 2006
Medical, science
1TIS 30-2555 (2012) Medical nitrous oxide
Effective Date : September 15, 2014
2TIS 531-2546 (2003) Plastics containers for sterile pharmaceutical products
Effective Date : January 29, 2005
3TIS 539-2546 (2003) Medical carbondioxide
Effective Date : January 10, 2005
4TIS 540-2555 (2012) Medical oxygen
Effective Date : December 19, 2014
Paints, colour, and varnishes
1TIS 496-2553 (2010) Lacquer thinner
Effective Date : September 9, 2013
2TIS 520-2553 (2010) Nitrocellulose lacquer thinner
Effective Date : September 9, 2013
3TIS 1149-2548 (2005) Wax crayons
Effective Date : June 22, 2007
Mechanical Engineering and Vehicles
1TIS 196-2536 (1993) Automobile safety glasses: laminated glass
Effective Date : September 21, 1994
2TIS 197-2536 (1993) Automobile safety glasses: tempered glass
Effective Date : September 21, 1994
3TIS 198-2536 (1993) Automobile safety glasses: zone tempered glass
Effective Date : September 21, 1994
4TIS 341-2543 (2000) Motorcycle exhaust muffler
Effective Date : August 25, 2001
5TIS 369-2539 (1996) Protective helmets for vehicle users
Effective Date : February 28, 1997
6TIS 370-2552 (2009) Liquefied petroleum gas cylinder for internal combustion engines
Effective Date : August 8, 2010
7TIS 683-2530 (1987) Motorcycle rubber inner tubes
Effective Date : March 16, 2008
8TIS 721-2551 (2008) Seat Belts for Automobiles
Effective Date : February 26, 2011
9TIS 787-2551 (2008) Small size water cooled diesel engines
Effective Date : June 28, 2010
10TIS 1040-2541 (1998) Two-stroke gasoline engine lubricating oil
Effective Date : August 4, 2005
11TIS 2315-2551 (2008) Heavy motor vehicle equipped with compression ignition engines : safety requirements; emission from engine, level 4
Effective Date : March 1, 2009
12TIS 2320-2552 (2009) Heavy motor vehicle equipped with position ignition engines fuelled with natural gas or liquefied petroleum gas : safety requirements; emission from engine, level 1
Effective Date : September 15, 2011
13TIS 2350-2551 (2008) Motorcycles: safety requirements; emission from engine, level 6
Effective Date : March 1, 2009
14TIS 2540-2554 (2011) Positive ignition engined vehicles : safety requirements; emission from engine, level 8
Effective Date : December 8, 2012
15TIS 2550-2554 (2011) Light duty compress ignition engined vehicles : safety requirements; emission from engine, level 7
Effective Date : November 13, 2012
16TIS 2555-2554 (2011) Light motor vehicle equipped with positive ignition engines fuelled with natural gas or liquefied petroleum gas : safety requirements ; emission from engine, level 1
Effective Date : January 22, 2014
Chemical
1TIS 1746-2545 (2002) Ammonium nitrate for anfo explosive
Effective Date : October 8, 2004

Last Update : September 11, 2014
更多、更新请参阅官方网站：http://app.tisi.go.th/standard/comp_eng.html
泰国 TISI认证, TISI标志
电磁兼容网 - 电磁兼容定制方案 www.emc.wiki - 欢迎您的技术讨论！
广州EMC测试、整改、认证优惠，来电告知来自电磁兼容网客户一律有折扣！！！
回复

使用道具 举报

曾大侠 | 2014-11-12 21:51:14 | 显示全部楼层

泰国TISI认证规则


Criteria for Product Certification

1. Objectives
         The Industrial Product Standards Council (IPSC) has revised the criteria for product certification with a view to:
1.1 Operating the certification in an appropriate, clear, transparent and non-discriminatory manner.
1.2 Complying with the international certification system and to keep pace with the industrial development.
1.3 Complying with the policy of Ministry of Industry in enhancing the industrial capacity and increasing the responsibility of the industry for their enterprises, their society and their consumers.
1.4 Reducing the supervisory role of the government and change it to the monitoring role.


2. Principle
2.1 Product certification of the Thai Industrial Standards Institute (TISI) is based on two technical criteria:
2.1.1 The products are in conformity with the applicable standards.
2.1.2 Manufacturers have adequate quality control system to maintain the conformity of the products with the standards.
2.2 Product certification procedure of TISI consists of the following:
2.2.1 Inspection before a licence is granted
2.2.2 Surveillance after a licence is granted


3. Inspection before a Licence is Granted
3.1 Inspection before a licence is granted will be conducted as follows:
3.1.1 Assessment of the quality control system of the manufacturers
3.1.2 Evaluation of products
3.2 Assessment of the quality control system of the manufacturers
The quality control system of the manufacturers will be assessed according tothe particular requirements for products certification and the general requirements for products quality control system as follows:
3.2.1 Factory visit and/or assessment
of documents showing the quality control process Quality control system of the manufacturer will be assessed by TISI competent officials during the factory visit. In the case of application to import products and factory visit is not practical, such assessment will be carried out on the documents showing the quality control process of the manufacturers. Factory visit at the factory abroad may be necessary if the quality control documents have proved to be inadequate.
3.2.2 Examination of the ISO 9000 certificates
Assessment of the quality control system will be exempted for the manufacturers who have been awarded ISO 9000 certificates. Quality management system certificate of the manufacturer for such product or product group will be considered provided that such certificate is issued by the certification body which complies with the following requirements :
(1)the ISO 9000 certification body which has been accredited by the Office of the National Accreditation Council (ONAC) of Thailand, or
(2)the ISO 9000 certification body which has been approved by the Industrial Product Standards Council.
However, TISI may conduct additional assessment on the items where the certified quality management system of the manufacturer differ from the particular requirements for products certification and the general requirements for products quality control system or is not complete.
3.3 Evaluation of products
TISI will evaluate the product against the applicable Thai Industrial Standard (TIS) and the relevant particular requirements for products certification by the one or more of the following procedures;
3.3.1 Taking sample to be tested by designated laboratory Sample of product taken by TISI competent officials will be tested by designated laboratory, or laboratory accredited under the scope relevant to such product or product group by Thai Laboratory Accreditation Scheme (TLAS) or laboratory accreditation body which has been approved by the Industrial Product Standards Council.
3.3.2 Taking sample to be tested at the factory by the factory's staff under supervision of the competent officials Sample of product will be taken and tested at the factory by the factory's staffs under supervision of TISI competent officials where the factory's laboratory is considered to be completely equipped with specified testing equipment and to have competent personnel.
3.3.3 Examination of test report Product sampling for testing will be exempted for the manufacturer whose product testing has been carried out by laboratory which has been approved by the Industrial Product Standards Council. Test report issued by such laboratory will be considered. However, TISI may take sample for additional testing on the items where the test report differs from the applicable standard and the particular requirements for products certification or is not complete.


4. Surveillance after a Licence is Granted
         Surveillance will be carried out to ensure that the certified products continue to conform to the applicable standards and that the manufacturer is still capable of maintaining the quality of the certified product. Surveillance scheme consists of:
4.1 Routine surveillance
Surveillance will be carried out by the one or both of the following, as the case may be:
(1) Surveillance of the quality control system
(2) Surveillane of the quality of certified products

The frequency for carrying out surveillance will be set according to the licensee's consistency of the quality control system and previous surveillance. However, it may be adjusted to be more frequent in case where non-compliances were identified in previous surveillance or there appears a reason to believe that the factory is not capable of maintaining the conformity of the product with the standard or when complaints having been received by TISI, and may be adjusted to be less frequent if the surveillance report shows the licensee's capability of maintaining the conformity of the product with the standard.
4.1.1 Surveillance of the quality control system
The on-site surveillance of quality control system by TISI competent officials will be carried out regularly to ensure that the licensee still maintains the capacity to control the product's conformance. However, the licensee may or may not be informed in advance.
4.1.2 Surveillance of quality of certified product
Surveillance will be carried out by the one or more of the following procedures where appropriate;
(1)Taking sample from the factory to be tested by designated laboratory
Sample of product taken from the factory by TISI competent officials will be tested by designated laboratory, or laboratory accredited under the scope relevant to such product or product group by Thai Laboratory Accreditation Scheme (TLAS) or laboratory accreditation body which has been approved by the Industrial Product Standards Council.
(2)Taking sample to be tested at the factory
Sample of product will be taken and tested at the factory by the factory's staffs under supervision of TISI competent officials where the factory's laboratory is considered to be completely equipped with specified testing equipment and to have competent personnel.
(3)Taking sample from sale premises to be tested by designated laboratory
Sample of certified product taken from sale premises will be tested by designated laboratory to ensure the conformity with the standard.
(4)Taking sample from each import to be tested by designated laboratory
In the case of imported product where on-site surveillance of quality control system is not practical, sample of product will be taken from each import to be tested by designated laboratory.
4.2 Monitoring
The premises of the manufacturer and the importer as well as sale premises will be monitored without being informed in advance to ensure the manufacture and sale of products which conform to the standard, and to prevent the misuse or inappropriate use of standards mark as well as any activities which violate the Industrial Product Standards Act B.E. 2511 and its amendments.

专注EMC电磁兼容整改！ 联系电话 139 2899 3907
广州EMC测试、整改、认证优惠，来电告知来自电磁兼容网客户一律有折扣！！！
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册会员

本版积分规则

xavier

49

主题

30

回帖

243

积分

中级会员

积分
243
回复楼主 返回列表