IEC 62619:2022
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
IEC 62619:2022 specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications, including stationary applications. When there exists an IEC International Standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this document, the former takes precedence (e.g., IEC 62660 series on road vehicles). The following are some examples of applications that utilize cells and batteries under the scope of this document:
- Stationary applications: telecom, uninterruptible power supplies (UPS), electrical energy storage system, utility switching, emergency power, and similar applications.
- Motive applications: forklift truck, golf cart, automated guided vehicle (AGV), railway vehicles, and marine vehicles, with the exception of road vehicles. 
IEC 62619：2022
含有碱性或其他非酸性电解质的二次电池和电池组 - 二次锂电池和电池组的安全要求，用于工业应用
IEC 62619：2022规定了工业应用（包括固定应用）中使用的二次锂电池和电池的安全运行要求和测试。当存在IEC国际标准，规定特殊应用中使用的单元的测试条件和要求，并且与本文档冲突时，前者优先（例如，道路车辆上的IEC 62660系列）。以下是本文档范围内利用电池和电池组的一些应用示例：
- 固定式应用：电信、不间断电源 （UPS）、电储能系统、公用事业开关、应急电源和类似应用。
- 动力应用：叉车、高尔夫球车、自动导引车（AGV）、铁路车辆和海洋车辆，公路车辆除外。
IEC 62619于2017年2月13日发布，是储能电池的国际安全标准，属自愿性认证。 IEC 62619为工业用（含固定式）锂蓄电池和锂蓄电池组的安全要求和测试方法。
TUV - IEC 62619 CB Scheme test report
TUV IEC62619 CB报告下载 https://www.emc.wiki/thread-5331-1-1.html |
