WIFI做CE认证，需要做什么标准呢？
WIFI CE认证Radio Equipment Directive (RED)
[*]ETSI EN 300 440 - for 5G wiki
[*]ETSI EN 300 328 - for 2.4G wiki
[*]ETSI EN 301 893 - for DFS
[*]ETSI EN 301 489 - for 无线产品的EMC
[*]IEC 62368-1 - for 安规、LVD
[*]EN 62311...... - for EMF
欧洲WIFI测试项目
[*]4.1.1 RF OUTPUT POWER
[*]4.1.2 MAXIMUM SPECTRAL POWER DENSITY
[*]4.1.3 DUTY CYCLE, TX-SEQUENCE, TX-GAP
[*]4.1.4 MEDIUM UTILISATION FACTOR
[*]4.1.5 ADAPTIVITY
[*]4.1.6 OCCUPIED CHANNEL BANDWIDTH
[*]4.1.7 TRANSMITTER UNWANTED EMISSIONS IN THE OOB DOMAIN
[*]4.1.8 TRANSMITTER UNWANTED EMISSIONS IN THE SPURIOUS DOMAIN
[*]4.2.1 RECEIVER RADIATED SPURIOUS EMISSIONS
[*]4.2.2 RECEIVER BLOCKING
[*]4.2.3 GEO-LOCATION CAPABILITY
[*]5.1.1 ELECTROMAGNETIC FIELDS
CE RED认证标准
https://i.emc.wiki/CE_RED
欧洲蓝牙BT RED认证标准
蓝牙无线产品，做欧洲无线RED认证，需要做哪些标准？[*]RF(有意发射射频部分)
[*]EN 300328 V2.2.2
[*]EN 301489-1 V2.2.3
[*]EN 301489-17 V3.2.2
[*]EMC(无意发射部分，依据不同的产品，采用不同的产品标准，如下以蓝牙音箱为例子)
[*]EN IEC 61000-3-2:2019
[*]EN 61000-3-3:2013/A1:2019
[*]EN 55032:2015/A11:2020
[*]EN 55035:2017 or EN 55024:2010/A1:2015
[*]LVD(低电压指令,以下二选一)
[*]EN 62368-1:2014+A11:2017
[*]or
[*]EN 60950
[*]EMF
[*]EN 62479：2010
欧洲蓝牙RED测试项目
RADIO TECHNICAL REQUIREMENTS SPECIFICATION IN EN 300 328[*]Transmitter Conditions
[*]Test conditions 测试条件
[*]Normal conditions 正常情况发射功率
[*]Extreme conditions 极端条件发射功率
[*]Test frequencies 测试频率
[*]Transmitter Requirements 发射机要求
[*]Equivalent Isotrapically Radiated Power 等值辐射功率
[*]Maxmum e.i.r.p. Spectral Power Density 最大e.i.r.p. 频谱功率密度
[*]Frequency Range 频率范围
[*]Dwell Time 停留时间
[*]Carrier Frequencies Separated 载波频率分开
[*]Hopping Channel Number 跳频频道号
[*]Medium access protocol 媒体访问协议
[*]Transmitter Spurious Emissions 发射机杂散发射
[*]Receiver Requirements 接收机要求
[*]Receiver Spurious Emissions 接收器杂散发射
CE Regulations for SRDs Operating in License-Free 2.4GHz/5 GHz Bands
页:
[1]
